MI-Flash – No 6 Metal Black EPDM 127-230 mm Lo Temp
£15.23 £18.28 (inc VAT)
MI-Flash – No 6 Metal Black EPDM 127mm to 230mm
Suitable for profiled sheeting and flat panel surfaces with external pipe diameters of (5 to 9 inch) / 127 to 230mm.
Suitable for profiled sheeting and flat panel surfaces and is temperature resistance -55C to 135C.
Pitch – 0-45 degrees
Made of EPDM, these flashings are componded specifically for maximum resistance to weathering due to ozone and ultraviolet light. Fast, one piece construction allows for easy on-site installation in usually 5 minutes. The base is designed to form a seal on most panel configurations and roof pitches regardless of pipe location.
Installation Check List
- Choose pipe opening and trim using a stanley knife or scissors
- Slide flashing over pipe (you may need to lubricate the flashing with some grease)
- Form the flashing to the same profile as the roof
- Apply sealant (not suppplied)
- Fasten using the screws and caps (not supplied)
Flashing & Accessories
Flues & Fittings
5 Inch (125mm) Black Twin Wall Flue
6 Inch (150mm) Twin Wall
5 Inch (125mm) Twin Wall
Stainless Steel Twin Wall Flue
|Country/Region of Manufacture||
6 Inch (150mm) Black Twin Wall Flue
Delivery charges are dependent on area and the products you are ordering.
Local Pick Up Free
England & Wales £4.99
Scotland From £9.99
Unfortunately we do not deliver to Ireland, Scottish Islands or above Glasgow and Isle Of Wight.
If you need more infomation regarding delivery, please call 01843 842727 Mon to Fri 8am to 5pm.