Twin Wall 90 Degree Tee 125mm Black
£69.50 – £92.47
Twin Wall 90 Tee, 125mm Black
The 90 degrees tee is usually installed when you are connecting the flue to the rear outlet of an appliance. It means that the flue can be cleaned via the bottom outlet of the 90 degrees tee. It also allow connection between horizontal and vertical runs.
This item comes with a 2 FREE locking bands.
For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler and any solid fuel appliances.
- HETAS Approved
- CE marked EN1856-1 T600 N1 D V2 L50040 G60.
Outer skin is made from 304 grade stainless steel and is 0.4mm thick. This is then powder coated in a high temperature black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 128kg per cubic metre. All parts are fully welded.distance to combustibles is 60mm.
Installation Check List
Twin wall insulated chimney parts are secured together by using a locking band (supplied).Make sure that you keep a distance of 60mm from the outside of the flue to any combustible material (wood, plaster board).
It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year.
Tee Only, Tee With Cap
Delivery charges are dependent on area and the products you are ordering.
Local Pick Up Free
England & Wales £4.99
Scotland From £9.99
Unfortunately we do not deliver to Ireland, Scottish Islands or above Glasgow and Isle Of Wight.
If you need more infomation regarding delivery, please call 01843 842727 Mon to Fri 8am to 5pm.