Kit 3 Flue Liner kit 316 150mm

£211.00£379.00

Product Description

316 Solid Fuel Stainless Steel Flue Liner 6 inch 150mm Kit 3

Model: 316/316 liner Kit 3, 6 inch

Multi fuel flexible liner made from 316L grade stainless steel – Life Time manufacturers warranty with this product (conditions apply) A double skinned flexible flue liner suitable for relining within a masonry chimney. Flue liner is suitable for use with burning gas, dry logs, cured dry peat. If the appliance is mainly going to be used to burn wood, and the appliance is not DEFRA approved you should increase the diameter of the Flue Liner to 150mm (providing this will fit in the masonry chimney), as recommended by Building Regulations.

Whats Included in The Kit

  • 6 inch Flue Liner per meter is approved and listed by HETAS EN1856-2 T450 N1 D V 3 L50012 G
  • Nose cone
  • ID Plate
  • Terracotta Anti Down Draught Pot Hanger
  • Equal Vitreous to Flue Liner Adaptor
  • Approval – Listed by HETAS EN1856-2 T450 N1 D V 3 L50012 G
  • Fuels – Wood, Oil, Gas, Low Sulpher Coal

Construction

The flue liner has a smooth inner liner made from 316L grade stainless steel and is 0.12mm thick. The flue liner has a convoluted outer skin made from 316L stainless steel and is 0.12mm thick. The Flue Liner is constructed from a single strip of steel which is bent at 180 degrees and then the seam is folded in four planes to give a quattrolock seal.

Installation Check List

Make sure the liner will go down the chimney (this can be done by pulling down a small section of the diameter liner you will be using)Sweep your chimney.

Check you pot is in good condition, if you are NOT using a suspended cowl then remove the pot from the stack.InstallationFlue Liner should always be fitted from the top.

Make sure the arrows are pointing upwards (gas flow).Secure a piece of string (at least the same length as the Flue Liner to the Nose Cone (order separately).Now attach the Nose Cone onto the end of the Flue Liner, again making sure the arrows on the Flue Liner are pointing away from the Nose Cone in a upward direction so when the liner is installed the arrows will be pointing to the top of the chimney.

Pull the liner down the chimney using the string and at the same time have someone at the top of the chimney feeding the Flue Liner down, once the Flue Liner is fitted remove the Nose Cone.10 year manufacturers warranty with this product,

Manufactuter Warranty

To register for a Your warranty please fill in the online form Life Time Warranty Form

Installation

It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year.

IMPORTANT BEFORE YOU BUY

Make sure you are ordering the correct size and length as this item is a made to measure service and cannot be returned Once ordered.

Additional Information

Weight N/A
gtin

7091165453193

Woocategory3

Chimney Liner Fitting Kit 3

Length

10 Meters, 11 Meters, 12 Meters, 13 Meters, 14 Meters, 15 Meters, 3 Meters, 4 Meters, 5 Meters, 6 Meters, 7 Meters, 8 Meters, 9 Meters

Local Pick Up Free

Local Delivery £9.99 (on our own transport)

England & Wales £14.99

Scotland £165.00

Unfortunately we do not deliver to Ireland, Scottish Islands or above Glasgow and Isle Of Wight.

If you need more infomation regarding delivery, please call 01843 842727 Mon to Fri 8am to 5pm.