Product Description

Ventilated Firestop Plate 150mm

Convesa Ventilated Firestop 150mm is designed for use with twin wall, insulated flue pipe with an external diameter of 200mm.

Model: 10-150-073

The Convesa Ventilated Firestop 150mm must be used on solid fuel appliances.

A Firestop plate is used to allow the chimney to pass between floors, for example, when you need the chimney to go through the ceiling on the ground floor through to the first floor.

The steel plate is designed to provide the appropriate distance between the flue and the adjacent flammable materials, according to both fire and building regulations. It is attached to the underside of the ceiling. If you are going through a second ceiling then you should use a second Firestop plate on the floor and again on the first floor ceiling.

You should use a Ventilated Firestop when the installed appliance will burn solid fuels, for example wood, coal, etc. A non-ventilated firestop plate can be used on installations burning gas or oil.

Application

For use on solid fuel and gas/oil appliances. eg: wood stoves, gas coal effect fires, oil boiler and any solid fuel appliances.

Approval

• HETAS Approved
• CE marked EN1856-1 T600 N1 D V2 L50040 G60
• 12 Year Warranty

Construction

Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 128kg per cubic metre. All parts are fully welded.

Distance to combustibles is 60mm.

Installation Check List

Screw the Firestop Plate into the ceiling or into the floor where the flue passes through the ceiling.Make sure that no combustible material is within the flanged area of the Firestop Plate.

Maintenance

It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year.