Mira Discovery Concentric EV surface mounted inc riser kit 1.1595.002

The Mira Discovery Thermostatic Mixer is a Thermostatic Shower Control with separate flow and temperature controls. A 12 L/Min flow regulator is supplied for high pressure systems to reduce excessive shower force.
The Thermostatic Mixer incorporates a wax capsule temperature sensing unit, which provides an almost immediate response to changes in pressures or temperature of the incoming water supplies to maintain the selected temperature.
An adjustable maximum temperature stop is provided which limits the temperature to a safe level. Inlet Filters are fitted to protect the thermostatic cartridge.

Mira Discovery EV Surface mounted

Thermostatic Mixer for connection to concealed pipework or surface pipework, supplied complete with Mira Discovery Shower Fittings. Comes with riser kit Four spray showerhead with partial rub clean rubber nozzles for easy cleaning

This product has been certified as a Type 2 valve under the BUILDCERT TMV2 scheme. This product also complies with the Water Supply (water fittings) Regulations 1999.

Thermostatic Shut-down

For safety and comfort the thermostat will shut off the mixing valve within 2 Seconds if either supply fails (achieved only if the blend temperature has a minimum differential of 12ï½°Cfrom either supply temperature).

Guarantee

For domestic installations, Mira Showers guarantee the Mira Discovery against any defect in materials or workmanship for a period of three years from the date of purchase (shower fittings for one year).
For non-domestic installations, Mira Showers guarantee the Mira Discovery against any defect in materials or workmanship for a period of one year from the date of purchase.

Pressures

Max Static Pressure: 10 Bar.
Max Maintained Pressure: 5 Bar.
Min Maintained Pressure (Gravity System): 0.1 Bar. (0.1 bar = 1 Metre head from cold tank base to shower handset outlet)
Note! For gravity fed / other low pressure systems (0.5 bar or below) do not fit the flow regulator.
For optimum performance supplies should be nominally equal

Note! For gravity fed or other low pressure systems (0.5 bar or below) do not fit the outlet flow regulator (where applicable).
For optimum performance supplies should be nominally equal.

Temperatures

Factory Pre-set (Blend) Shower: 43C. Optimum Thermostatic Control Range: 35C to 43C (achieved with supplies of 15C cold, 65C hot and nominally equal pressures).
Recommended Hot Supply: 60C to 65C
Note, The mixing valve can operate at higher temperatures for short periods without damage, however this could detrimentally affect thermostatic performance. For safety and performance reasons it is recommended that the maximum hot water temperature is limited to 65ï½°C.
Cold Water Range: up to 25C.
Minimum Recommended Differential between Hot Supply and Outlet Temperature: 12C.

Connections

Inlets: 15 mm Compression.
Outlet: ï½½" BSP Flat Face / 15 mm Compression
Standard connections are: hot - left, cold - right, outlet - bottom (EV models), top (BIV models).

Thermostatic Shut-down

For safety and comfort the thermostat will shut off the mixing valve within 2 Seconds if either supply fails (achieved only if the blend temperature has a minimum differential of 12c from either supply temperature).

Mira Discovery Exposed

Thermostatic Mixer for connection to rising, falling or rear entry pipework, supplied complete with Mira Discovery Shower Fittings. Comes complete with Four spray showerhead with partial rub clean rubber nozzles for easy cleaning

Mira showers.Bringing both thermostatic temperature and flow control onto one simple to use dial, Mira Element's built-in valve makes showering beautifully simple - and stunningly affordable.

Features	Thermostatic control
Model	1.1656.001
Suitible for	Low & High pressure
Warranty	5 Years
WRAS approved	Yes
Finish	Chrome
Manufacturer	Mira

Name

Location

E-mail Address

Question

100 characters remaining

Full explanation of question